The 25G SFP28 AOC – active optical cable is an end-to-end enclosed system for linking two SFP28 data ports within the 25Gbps SR distances to each other. The SFP28 MSA-compliant implementation allows the user to plug-and-play the solution into any link length up to 100m to operate at the IEEE 25G 802.3by data link specification. The SFP28 cable is a self-contained, end-to-end link using 25Gbps opto-electronics with CDR and a proprietary optical engine. The optical ends are never exposed to the data center environment; therefore, no cleaning or special handling is required.
The 25G SFP28 AOC provide a superior alternative to the direct-attach copper cables of the past. Offering full compliance to 25G Ethernet standard and improved power efficiency than active copper cables, this active optical cables also bring plug-and-play simplicity, better EMI, improved bend radius, and increased reach of up to 100 meters – all while being substantially lighter and thinner than copper.
Features
- Hot-pluggable SFP28 form-factor connectors
- 850nm VCSEL laser and PIN photo-detector
- Internal CDR circuits on both receiver and transmitter channels
- Compliant with SFP28 MSA and IEEE 802.3by 25GBASE-SR
- Data rate up to 25.78Gbps
- Length up to 70m (OM3) or 100m (OM4) over MMF
- Power consumption < 1W per end
- Operating case temperature range from 0°C to 70°C
- 3.3V power supply voltage
- RoHS compliant (lead free)
10m (33ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Arista AOC-S-S-25G-10M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
10m (33ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Cisco SFP28-25G-AOC10M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
10m (33ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Dell CBL-25GSFP28-AOC-10M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
10m (33ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Intel XXVAOCBL10M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
10m (33ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Juniper JNP-25G-AOC-10M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
10m (33ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Mellanox MFA2P10-A010
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
15m (49ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Arista AOC-S-S-25G-15M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
15m (49ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Cisco SFP28-25G-AOC15M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
15m (49ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Dell CBL-25GSFP28-AOC-15M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
15m (49ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Intel XXVAOCBL15M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
15m (49ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Juniper JNP-25G-AOC-15M
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
15m (49ft) 25G SFP28 Ethernet Active Optical Cables Compatible with Mellanox MFA2P10-A015
The 25GbE SFP28 Ethernet active optical cables (AOCs) is a direct-attach fiber with SFP28 connectors and operates over Multi-Mode Fiber (MMF). This AOC is compliant with the SFF-8432 SFP28 MSA standards.The AOC cables are most often used for creating 3-30m short switch-to-switch or switch-to-GPU links. It provides a cost-efficient solution as compared to using discrete optical transceivers and optical patch cables and is suitable for 25Gbps connections within racks and across adjacent racks.
